Memisah Bandwidth Lokal dan Internasional

Sewaktu membuat router untuk memisah bandwidht lokal dan international, saya mengikuti tutorial dari mikrotik.co.id. Langkah-langkahnya saya samakan persis semua. Tapi koq gak jalan ya?
Diulangi saja lagi. Dari awal. system reset .Pertama set ip address, publik dan private. Kemudian ip route. Kemudian buat NAT. Tambahkan ip NICE ke address-list. Buat mangle. Dan buat simple queue. Detailnya sbb:
1. Set ip address

/ip address
add address=203.xx.xx.186/30 interface=WAN
add address=192.168.3.1/24 interface=LAN

2. set gateway

/ip route add gateway=203.xx.xx.185

3. melakukan NAT

/ip firewall nat add chain=srcnat action=masquerade

4. Masukkan nice ke address list. Nice dapat diperoleh disini.

/ip firewall address-list
add list=nice address=”1.2.3.4″
remove [find list="nice"]
add list=nice address=”114.120.0.0/13″
add list=nice address=”114.56.0.0/14″
add list=nice address=”125.166.0.0/15″
…
…
…
dst

5. set mangle

/ip firewall mangle
add chain=prerouting in-interface=LAN dst-address-list=nice action=mark-connection new-connection-mark=conn-iix passthrough=yes
add chain=prerouting connection-mark=conn-iix action=mark-packet new-packet-mark=packet-iix passthrough=no
add chain=prerouting action=mark-packet new-packet-mark=packet-intl passthrough=no

6. set simple queue. Setiap klien dibuat 2 rule simple queue.

/queue simple
add name=”komp_lokal” target-addresses=192.168.3.11/32 interface=all packet-marks=packet-iix max-limit=256000/256000
add name=”komp_international” target-addresses=192.168.3.11/32 interface=all packet-marks=packet-intl max-limit=64000/64000